MIAO YANG MARINE SDN BHD

Loading

NGT-1 nmea 2000 to pc interface

NGT-1 nmea 2000 to pc interface

The NGT-1 is an intelligent NMEA 2000 gateway able to precisely Transfer messages to and from the NMEA 2000 bus. It is compatible with a wide range of Chartplotters, display and configuration applications available for PCs.

The diagnostic NMEA Reader software allows viewing of NMEA 2000 messages with configuration options, enabling some set-up of Actisense products on the NMEA 2000 bus.

SKU: NGT-1 NMEA 2000 Category:

Description

KEY FEATURES

  • Vital NMEA 2000 diagnostic tool
  • USB version is fully isolated to prevent dangerous ground loops
  • ISO version has OPTO-isolated input and ISO-Drive™ output for safely interfacing with RS232 or RS422
  • Up to 230,400 baud data transfer rate
  • Integrated 1.5m drop cable
  • Diagnostic receive LEDs

SPECIFICATION

Technical Specifications

Power Supply (ISO Variant)
Supply Voltage (NMEA 2000 Port) 9.5 to 35V DC
Supply Current (NMEA 2000 Port) 35mA @ 12V DC, Max 50mA
Load Equivalent Number (LEN) 1
Power Supply (USB Variant)
Supply Voltage (NMEA 2000 Port) 9 to 29V DC
Supply Current (USB Host Port) 85mA @ 5V DC
Supply Current (NMEA 2000 Port) 15mA @ 12V DC, Max 50mA
Load Equivalent Number (LEN) 1
NMEA 2000 Port (All Variants)
Compatibility Fully NMEA 2000 certified
Galvanic Isolation Refer to ‘ISO port’ or ‘USB port’
Speed / Baud Rate 250kbps
Connectivity M12 Male (A polarised) connector moulded on cable
Cable Length NMEA 2000 1.5m
Cable Length STNG Adapter 0.4m (1.9m with NMEA 2000 cable connected)
ISO Port (NGT-1-ISO)
Compatibility Fully RS232 & RS422 compatible.
Galvanic Isolation 2500V input to ground, 1500V output to ground using ISO-Drive
Speed/Baud Rate 4800 to 115200 Baud
Output Voltage Drive >= 2.1V (differential) into 100Ω
Output Current Drive 20mA max.
Output Protection Short circuit and ESD
Input Voltage Tolerance -15V to +15V continuous -35V to +35V short term (< 1 second)
Input Protection Current limited and overdrive protection to 40VDC
Connectivity 5mm stripped and tinned wire
Cable Length 1.5m
USB Port (NGT-1-USB)
Compatibility USB 1.1, 2.0 and 3.0
Galvanic Isolation 2500V input to ground
Speed / Baud Rate 4800 to 230400 Baud
Connectivity Male type A plug moulded onto cable
Cable Length 1.5m
Drivers (Latest OS) Windows XP, Vista, 7, 8, 10 & MAC OS X supplied on CD & available via the ‘Downloads’ button towards the bottom of this web page
Drivers (Legacy OS) Contact Actisense for full details of the legacy OS versions supported: support@actisense.com
Mechanical
Housing Material Lid Polycarbonate
Housing Material Base Flame retardent ABS
Weight NGT-1-ISO 220g
Weight NGT-1-USB 210g
Weight STNG Adapter 40g
Approvals and Certifications
Fully NMEA 2000 Certified
Meets all IEC 61162-3 requirements
EMC IEC 60945 (sections 9, 10 & 11.2)
Environmental Protection IP54
Operating Temperature -20°C to +55°C
Storage Temperature -30°C to +70°C
Recommended Humidity 0 – 93% RH
Guarantee 3 years

GEEK MODE

  • Sends and receives pure NMEA 2000 data
  • Configure and flash-update Actisense products on the NMEA 2000 bus
  • Use with NMEA Reader to help diagnose network problems
  • Provides a rule-enforcing firewall between a PC and an NMEA 2000 bus
  • NGT-1-USB and NGT-1-ISO versions available to suit all installations