MIAO YANG MARINE SDN BHD

Loading

NDC-5

NDC-5

NDC-5

The NDC-5 is more than just an NMEA 0183 Combiner/ Multiplexer; it provides an installer with a highly flexible platform that can be used to solve many NMEA 0183 interconnectivity headaches.

Powerful routing allows any of the inputs to be routed to any output, combining data if required. Advanced features allow data rate conversion, auto-switching and advanced sentence-based routing and blocking.

SKU: NDC-5 Category:

Description

KEY FEATURES

    • 5 OPTO-Isolated NMEA 0183 inputs
    • 2 ISO-Drive NMEA 0183 outputs
    • Dedicated bi-directional Serial port (fully isolated utiising ISO-Drive technology)
    • Serial port can be used as additional input / output
    • Ethernet port supports direct and network connection
    • Configurable input and output baud rates
    • Allows Data combining and rate conversion
    • 2 independent Autoswitch virtual inputs with priority
    • Isolation to battery supply
    • Diagnostic LED’s
    • IP65 rated Polycarbonate housing
    • Optional DIN rail mount

SPECIFICATION

Technical Specifications

Power Supply
Input supply voltage 9 to 35 V DC
Input supply current 110mA max @ 12V DC (all outputs @ full drive into 100 ohm loads)
Input protection Continuous reverse polarity, transient overvoltage and ESD protection
Power indicator LED, Blue – indicates unit is functioning correctly
NMEA 0183 Port – Listener & Talker
Number of Listener / input ports 5 isolated NMEA 0183 Listeners
Number of Talker / output ports 2 isolated NMEA 0183 Talkers
Compatibility Fully NMEA 0183, RS422 & RS232 compatible. RS485 Listener compatible
Electrical isolation 2500 V input to ground, 1500 V output to ground using ISO-Drive™
Speed / baud rate In1 to In4: up to 38400 bps In5: 4800 bps Out1: up to 115200 bps Out2: up to 38400 bps
Talker output voltage drive >= 2.1V (differential) into 100 ohm
Talker output current drive 20 mA maximum per output
Talker output protection Short circuit and ESD
Listener input voltage tolerance -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)
Listener input protection Current limited, overdrive protection to 40 VDC and ESD protection
Listener data indicator LED, Green (Flashes to indicate valid input)
Status indicator LED, Green / Yellow / Red to indicate status (see user manual)

GEEK MODE

  • Ethernet port – for configuration and diagnostics. Sharing NMEA 0183 data will be added in a future firmware update
  • 6 OPTO-Isolated NMEA 0183 inputs (including the serial port)
  • 3 ISO-Drive NMEA 0183 outputs (including serial port)
  • Advanced Data Filtering/Routing
  • Configurable Input and output baud rates
  • Autoswitch mode available to offer system redundancy
  • Safe connection to USB with the ‘USBKIT-REG’  while powered via battery (not available with NDC-4)
  • Serial port – for configuration, diagnostics or as an additional NMEA 0183 input/output
  • Free firmware updates make the device future-proof
  • Power LED to indicate operational state
  • Rx LED to indicate data on inputs
  • Status LED (bi-colour) to indicate output Data Overload or a range of other states
  • DIN rail or Panel mountable
  • Pluggable screw terminal connectors for quick and easy installation

Related products